Raise 3D Filament Hyper Speed PLA is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt from a solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers. 

With optimized molecular weight and tuned flowability, Raise3D Hyper Speed PLA is capable of achieving faster melting in the hot end and much quicker cooling after the material has been extruded. As a result, the surface quality of parts printed by Hyper Speed filaments is smooth and most of the sharp details are kept. Most importantly, thanks to optimized molecular weight, Hyper Speed PLA shows excellent interlayer bonding quality and Z-direction strength. Therefore, Hyper speed PLA can be used for concept models and figures, prototyping, etc.

• high-speed filament
• detailed & smooth prints - even with a high speed the prints have a detailed and smooth surface
• excellent interlayer bonding quality and z-direction strength
• ideal for concept models and figures
• for Raise 3D Pro3 3D Printers with Hyper Speed Upgrade

Technical Specification

• Package size: 1 kg 
• Density: 1.21 g/cm3
• Heat Distortion Temperature: 53℃
• Young's Modulus: 2600± 215MPa
• Tensile Strength: 59 ± 1MPa
• Impact Strength: 4.3 ± 1.3 kJ/㎡
• Nozzle Temp: 220-250℃

• Please note that for Hyper Speed to function correctly, the Hyper Speed Hot Ends, the Auto Calibrator, and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us