Contact us!BASF Support Filament Ultrafuse BVOH – 2.85mm

BASF Support Filament Ultrafuse BVOH is a water-soluble support filament that has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility with a variety of materials: PLA, PRO1, ABS, ABS Fusion+, PA, and PAHT CF15. Store this monofilament in a sealed bag or container to prevent moisture uptake.

• water-soluble
• dissolves 2 times faster than PVA 
• support compatible with multiple materials - PLA/ ABS Fusion+/ TPUs/ PET/ PA/ PAHT CF15
• very easily dissolving in water
• for FFF/FDM 3D Printers

Technical Specification

• Package size: 350g 
• Density: 1.14 g/cm3
• Young's Modulus: 2339MPa (XY) and 1426MPa (ZX)
  
• Elongation at Break: 14.8% (XY) and 0.6% (ZX)
• Flexural Strength: 53.8MPa (XY) and 11.4MPa (ZX)
• Tensile Strength: 33.7MPa (XY) and 8.7MPa (ZX)
• Nozzle Temp: 190-210℃
• Bed Temperature: 60-100℃
• Print Speed: 30-60mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us