Contact us!BASF Filament Ultrafuse PA – 2.85mm

BASF Filament Ultrafuse PA is suitable for a wide range of applications working within a larger temperature range than normal PA filaments. BASF‘s Ultramid grades are molding compounds on the basis of PA6, PA66, and various co-polyamides such as PA6/66.

Ultramid is noted for its high mechanical strength, stiffness, and thermal stability.

In addition, Ultramid offers good toughness at low temperatures. Owing to its excellent properties, this material has become indispensable in almost all sectors of engineering for a wide range of different components and machine elements, as a high-grade electrical insulation material, and for many special applications.

• good fatigue resistance
• low melting point
• good wear resistance
• high mechanical strength
• good impact resistance at low temperatures
• ideal for engineering prototyping
• for FFF/FDM 3D Printers 

Technical Specification

• Package size: 750g 
• Density: 1.15 g/cm3
• HDT @ 0.45 MPa: 135 °C
• Young's Modulus: 2419MPa (XY) and 2122MPa (ZX)
  
• Elongation at Break: 9.6% (XY) and 0.8% (ZX)
• Flexural Strength: 77MPa (XY) and 40.2MPa (ZX)
• Tensile Strength: 61.4MPa (XY) and 16.4MPa (ZX)
• Impact Strength Charpy(notched): 5.6kJ/m2 (XY) and 1.2kJ/m2 (ZX)
• Nozzle Temp: 220-250℃
• Bed Temperature: 90-120℃
• Print Speed: 30-60mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us